Power switch 3.2 Hardware Connection Introduction: Use one RJ11 cable（match the ZXHN H108N package）to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on the wall. Use another RJ11 cable（match the ZXHN H108N package）to connect the MODEM (or ADSL) port of the splitter with the LINE port of the Gateway. Zte zxhn h108n v2.3 hol hellas online greece changing wifi network name and password this is how to change the name of your wireless network and the password you use to access it on the zxhn.
ZTE ZXHN H108N is ADSL/ADSL2+ Wi-Fi router based on Broadcom 6328.
- Model ZXHN H108N V2.5 Software Version V2.5.4MDT3 Boot Loader Version V1.1.0 DSL Firmware Version 4926e811. Date: Size: 3.64 MB.
- Zte zxhn h108n v2.3 hol hellas online greece changing wifi network name and password this is how to change the name of your wireless network and the password you use to access it on the zxhn. Attach one end of a network cable to your computer s ethernet port or a regular hub/switch port, and the other end to the lan port on the td-8616.
Supported Versions
| Brand | Model | Version | Current Release | Forum search | Forum Topic | Technical Data |
|---|---|---|---|---|---|---|
| ZTE | ZXHN H108N | v1 | 19.07.7 | https://forum.openwrt.org/viewtopic.php?id=42889 | View/Edit data |
Hardware Highlights
| Model | Version | SoC | CPU MHz | Flash MB | RAM MB | WLAN Hardware | WLAN2.4 | WLAN5.0 | 100M ports | Gbit ports | Modem | USB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZXHN H108N | v1 | Broadcom BCM63281 | 320 | 8 | 64 | Broadcom BCM43225 | b/g/n | - | 4 | - | ADSL2+ | 1x 2.0 |
Installation
Firmware downloads
| Model | Version | Current Release | Firmware OpenWrt Install | Firmware OpenWrt Upgrade | Firmware OEM Stock |
|---|---|---|---|---|---|
| ZXHN H108N | v1 | 19.07.7 | http://downloads.openwrt.org/releases/19.07.7/targets/brcm63xx/generic/openwrt-19.07.7-brcm63xx-generic-96328avng-generic-squashfs-cfe-8M.bin |
Installation via CFE web recovery
- Turn off modem.
- Press “reset” and keeping it pressed, turn on the router.
- Browse to “192.168.1.1”, you should see this screen:
- Select the previously downloaded image and press “upgrade”.
- Power led will flash from green to red (aprox 2 minutes) and finally stays orange.
It seems that there are 2 different models identified as H108N, one based on Broadcom 6328 and the other on Realtek RTL8672 (unsupportable). OpenWrt is only valid for the model based on Broadcom 6328. Instructions to know our chipset without opening the router:
telnet 192.168.1.1
If the result is this, you can not install OpenWrt on the router.
Tested Versions
| Version/Model | Launch Date | S/N | OpenWrt Version Supported | Model Specific Notes |
|---|---|---|---|---|
| AZRFC V1.0 | - | - | CHAOS CALMER (15.05.1, r48532) | - |
Hardware
Info
| Architecture | MIPS |
|---|---|
| Vendor | Broadcom |
| bootloader | CFE |
| System-On-Chip | Broadcom BCM63281 KFBG |
| CPU/Speed | 320MHz |
| Flash-Chip | Macronix MX25L6406E 8MiB) |
| RAM | Nanya Technology Corporation NT5TU32M16DG-AC (64MiB) |
| Wireless | Broadcom BCM43225 2.4GHz 802.11bgn |
| Ethernet | switch integrated in-SoC, 4x fast ethernet |
| Internet | ADSL/ADSL2+ |
| USB | 1 x 2.0 |
| Serial | ? |
| JTAG | ? |
Photos
Zxhn H108n V2.3 Firmware Version 10.0 Download
Model Number
Front:
Photo of front of the casing
Back:
Photo of back of the casing
Main PCB
Photo of PCB
Serial
→ port.serial general information about the serial port, serial port cable, etc.
Serial Port rs232-TTL 3v3.
baudrate 115200
Serial log:
Photo of PCB with markings
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Zxhn H108n V2.3 Firmware Version 10.0 Download
Photo of PCB with markings
Psp Firmware Version
Debricking
Notes
upgrade page could be browsing 192.168.1.254 instead 192.168.1.1