Here are the latest step by step instructions for installing a USB to serial cable plus identifying and changing your com port number. This works with all Windows operating systems.

Driver Para Cable Usb Serial Omega-3

The following procedure works with all of our cables including the Allen Bradley 1747-UIC, 1761-CBL-PM02, 1747-CP3, and 2711-NC13

USB PC-cable driver installation guide The Siemens LOGO! USB PC-cable can run under the following operating systems:.Windows 98SE/XP/2000/Vista.Linux 2.6 This guide will tell you how to install this software for:.Windows 98SE/XP/2000/Vista.Linux 2.6 LOGO!Soft Comfort V5.0 and earlier don’t support Mac OS 9 / OS X to use this.

Driver Para Cable Usb Serial Omega 7

• NOTE: This assumes the USB driver is already installed. If not, download the Setup Utility above and install the USB driver first STEP 1: Click the link above to download the utility. STEP 2: Unzip the contents to a folder on your PC. STEP 3: Connect your USB cable to your PC. DO NOT CONNECT THE DEVICE YET.
• CableMAX ® is the Internet’s premier online source for your computer cabling needs since 1996. We carry the latest in USB 3.0 technology, hubs, and serial communication cables or adapters. Our customer and tech support are here to answer your questions or advise you on your application needs.

1. To begin, click the start menu and type 'Device Manager' and click the Device Manager link.

Driver Para Cable Usb Serial Omega 8

2. Without your USB to serial adapter plugged in, your Device Manager should look something like below.

3. Plug your USB to serial cable into your PC's USB port. Chances are the drivers are already installed. Look for it to show up under 'Ports (COM & LPT)'. If it does, then note the COM number at the end of the description and proceed to the software you are using it in. If it doesn't show up under 'Ports (COM & LPT)' then proceed to step 4.

4. If your cable does not show up under 'Ports (COM & LPT)' of the Device Manager then you need to install the drivers. They can be found in the PLC Cable Drivers section of our Drivers, Software, and Manuals page. Download them and extract the zip file to your PC.

5. Navigate to the 'Drivers for manual installation' folder and you will find two folders named CH340 and CP210.

6. Double click on the CH340 folder and you will find an EXE file in it. Right click it and select 'Run as Administrator'. Note that this will not work by double clicking the EXE file.

Driver Para Cable Usb Serial Omega Psi Phi

7. Now navigate to the CP210 folder and then to the CP210x_VCP_Windows folder. You will see two EXE files, one for 32 bit and one for 64 bit. Right click the one that matches the processor of your PC and Right click it and select 'Run as Administrator'. Note that this will not work by double clicking the EXE file.